MIL-DTL-62366D(AT)
3.6.4 Shock (nonoperating). The slip ring assembly shall withstand induced shocks of
half-sine waves applied along three mutually perpendicular directions, with a peak valve of not
more than 25 gravity units (g) for 11 ms (see 4.3.8.4).
3.6.5 Vibration (nonoperating). The slip ring assembly shall withstand simple harmonic
motions in accordance with figure 2 applied along three mutually perpendicular directions for
3 hours along each axis (see 4.3.8.5).
3.6.6 High temperature. The slip ring assembly shall operate at a temperature of 140 °F
(60 °C) and withstand a nonoperating temperature of 160 °F (71 °C ) without sustaining damage
(see 4.3.8.6).
3.6.7 Low temperature. The slip ring assembly shall operate at a temperature of -25 °F
(-32 °C) and withstand a nonoperating temperature of -65 °F (-54 °C ) without sustaining
damage (see 4.3.8.7).
4. VERIFICATION
4.1 Classification of inspection. The inspection requirements specified herein are
classified as follows:
a. First article inspection (see 4.1.1).
b. Conformance inspection (see 4.1.2).
4.1.1 First article inspection. First article inspection shall be performed on preproduction
(see 4.1.1.1) or initial production (see 4.1.1.2) samples when a first article sample is required
(see 3.1). The inspection shall include all the verifications for requirements as specified in
table VI (see 3.1 and 3.6).
4.1.1.1 Preproduction inspection. When specified (see 6.2), the preproduction sample
shall consist of two slip ring assemblies.
4.1.1.2 Initial production inspection. Unless otherwise specified (see 6.2), the initial
production sample shall consist of two slip ring assemblies selected from the first ten units
produced.
4.1.2 Conformance inspection. As specified in the contract (see 6.2 and 6.4), each slip
ring assembly shall be subjected to and pass the verifications as specified in 4.3.3, 4.3.5.1
through 4.3.5.3, 4.3.5.5.2.2, 4.3.5.5.3.1 through 4.3.5.5.3.3, 4.3.7.2, 4.3.7.3, and 4.3.8.1.
4.1.2.1 Sampling. The sampling plan shall be as specified in the contract (see 6.2).
11
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business