INCH-POUND
MIL-PRF-11021H
6 November 2006
SUPERSEDING
MIL-PRF-11021G
17 May 1996
MS51113C
1 July 1976
PERFORMANCE SPECIFICATION
SWITCH, VEHICULAR LIGHTS: 28 VOLT DC
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1. SCOPE
1.1 Scope. This specification covers master lighting switches for controlling service and
blackout drive, marker, stop and tail, parking, and instrument panel lights on military motor
vehicles (see 6.1).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort has
been made to ensure the completeness of this list, document users are cautioned that they must
meet all specified requirement documents cited in sections 3 and 4 of this specification, whether
or not they are listed.
2.2 Government document.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards,
and handbooks form a part of this document to the extent specified herein. Unless otherwise
specified, the issues of these documents are those listed in the issue of Department of Defense
Index of Specifications and Standards (DoDISS) and supplement thereto, cited in the solicitation
(see 6.2).
Comments, suggestions, or questions on this document should be addressed to Tank-automotive
and Armaments Command, 6501 E. 11 Mile Road, Warren, MI 48397-5000 or emailed to
standardization@tacom.army.mil. Since contact information can change, you may want to
verify the currency of this address information using the ASSIST Online database at
https://assist.daps.dla.mil.
AMSC N/A
FSC 2590
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business