INCH-POUND
MIL-PRF-62365C(AT)
3 October 1997
SUPERSEDING
MIL-PRF-62365B(AT)
20 December 1996
PERFORMANCE SPECIFICATION
MOTOR, HYDRAULIC, CONSTANT DISPLACEMENT
This specification is approved for use by the US Army Tank-automotive
and Armaments Command, Department of the Army, and is available for
use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification describes one type of hydraulic motor used in a launcher
erection drive system on a military ground vehicle.
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
specified requirement documents cited in sections 3 and 4 of this specification, whether or not
they are listed.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may
be of use in improving this document should be addressed to: US Army Tank-automotive and
Armaments Command, ATTN: AMSTA-TR-E/BLUE, Warren, MI 48397-5000, by using the
Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this
document, or by letter.
AMSC N/A
FSC 2590
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business